Digital electronic truck scale is composed of digital weighing sensor, digital weighing display and modular platform. Digital technology has improved the quality of the electronic truck scale, making it easier to debug, safer to use, simpler to maintain, more convenient to communicate, more intelligent, and more anti-interference.

characteristic:

1. Digital communication technology

① RS485 bus technology is adopted to realize the long-distance transmission of signals, and the transmission distance is not less than 1000 meters;

② The output digital signal amplitude reaches 3~4V, which strengthens the anti-interference ability and improves the lightning protection ability of the system;

③ The bus structure is convenient for the application of multiple weighing sensors. A maximum of 32 weighing sensors can be connected in the same system.

2. Intelligent technology

① Prevent using simple circuit to change the weighing signal and size;

② The sensor characteristic parameters can be changed according to the command.

③ The memory capability eliminates the calibration problem after replacing the sensor.

3. Digital calibration technology

① Make the calibration of the weighing instrument bias load (four corners) complete automatically at one time;

② Calibrate the scale range at one time;

③ The scale factor and zero value, and the factor and zero parameter of each sensor can be modified as needed.

4. Fault diagnosis technology

① It has the ability to diagnose the change of zero value of the scale;

② Have the ability to diagnose the change of zero value of each sensor;

③ Have the ability to diagnose the communication changes of each sensor;

④ It has the prompt ability to judge the discrepancy between the address and the number after replacing the sensor;

⑤ It has the ability to prompt various operation error messages.

5. Eliminate cheating

The digital signal is protected by password in the transmission process, which prevents the truck scale from being remotely controlled by illegal elements and prevents cheating.

Appearance








Introduction: The display is applicable to static weighing systems with 1~16 digital sensors, such as electronic ground scale, electronic truck scale, static track scale, etc Basic functions: Automatic/manual angle difference correction With track scale correction mode Digital sensor communication address modification function Single sensor data viewing function It is convenient to call the internal code to display and replace the observation and analysis tolerance of the sensing weight The zero tracking range and zero setting (power on/manual) range can be set separately Automatic switching of second gear indexing value; Nonlinear correction function and calibration error correction function sleep timer Quick fill weighing sheet printing function setting Weighing record storage/inspection/deletion/power failure protection Equipped with RS-232C (RS422/RS485 optional) communication port Equipped with current loop large screen communication port; Equipped with standard parallel printing interface Technical parameters: Connection mode: RS485 Communication distance: about 1000 meters Number of connections: 1~16 Sensor power supply: DC 10V, 0.8A (Max) Display mode: 7-bit ultra-bright white light nixie tube, 10 status indicators Display range: － 325000 ～ 325000 (d=10)

sensor




characteristic ◆ Good accuracy and stability ◆ Good consistency, strong interchangeability, convenient installation and maintenance ◆ Good reliability and strong anti-interference ability ◆ Self-identification function for fault diagnosis ◆ Long transmission distance, fast communication speed and significant anti-cheating effect Technical indicators Accuracy grade OIML R60 C3 range t10,20,25,30,40,50 maximum calibration graduation n max3000 rated output Counts1000000 minimum calibration graduation V minEmax/7500 measurement rate/s10 comprehensive error% FS ≤± 0.020 excitation voltage V DC5.4 ～ 15 creep% FS/30min ≤± 0.016 influence of communication interface RS 485/4 wire system temperature on output sensitivity% FS/10 ℃ ≤± 0.011 influence of communication baud rate Bps9600 temperature on zero output% FS/10 ℃ ≤± 0.019 maximum communication distance m10 00 compensation temperature range ℃ - 10~+40 bus address number maximum 32 service temperature range ℃ - 20~+60 protection grade IP68 safe overload range% FS120 cable length m16 limit overload range% FS150 cable specification six-core shielded cable, ф six point two Overall dimension

Installation features of digital electronic truck scale




No foundation pit: It has convenient drainage, good waterproof performance, convenient maintenance and overhaul, but it covers a large area. Shallow foundation pit: The floor area is small, beautiful and tidy, but the drainage design needs to be added. Digital electronic truck scale model Product model SCS-10SCS-15SCS-20SCS-30SCS-50SCS-60SCS-80SCS-100SCS-120SCS-150SCS-200 Scale table size (m × m） 5×2☆☆ 6×2.2☆☆☆ 6×2.4 ☆☆ 6×2.5 ☆☆☆ 7×2.5 ☆☆ 7×3 ☆☆☆☆ 8×3 ☆☆☆☆☆ 9×3 ☆☆☆☆☆ 10×3 ☆☆☆☆☆ 12×3 ☆☆☆☆☆☆☆ 14×3 ☆☆☆☆☆☆☆ 15×3 ☆☆☆☆☆☆☆ 16×3 ☆☆☆☆☆☆☆ 16×3.3 ☆☆☆☆ 16×3.5 ☆☆☆☆ 18×3 ☆☆☆☆☆18×3.3 ☆☆☆☆☆18×3.5 ☆☆☆☆☆20×3 ☆☆☆☆20×3.5 ☆☆☆☆21×3.5 ☆☆☆☆24×3.5 ☆☆☆ Note: In addition to the table above, the table size and maximum weighing capacity can also be designed and manufactured according to user needs